Insulite has been fabricating insulating glass for over 15 years. Insulite offers insulating glass units from 7/16" (9mm) to 1" (25mm), with a maximum thickness of 1 5/16" (33mm) for sloped glazing. A variety of glass combinations of clear, tint, high-performance (pyrolitic and vacuum deposited) reflective and Low-E is available as annealed, heat-strengthened or tempered glass.

Insulite offers a variety of insulating glass make-ups depending on the end use. Insulite fabricates its insulating glass on a Lisec automated vertical production line, which produces the flattest and least distorted insulating glass units possible.

Dual Seal: polyisobutylene (butyl) primary seal; secondary seal of polysulfide for most applications and silicone for structural glazing. Silicone must be specified.

Edge Spacer: aluminum continuously bent and mechanically joined along the straight section providing the highest spacer frame integrity with air or argon filled air space.

Desiccant: molecular-sieve formulated for maximum absorption of moisture.

Glass Types: Insulite is a factory direct buyer of AFG, Guardian, Pilkington, PPG, and Visteon glazing select quality q3 float glass products.

Conformances:

• ASTM C1036-01, Standard Specification for Flat Glass
• ASTM C1048-04, Standard Specification for Heat-Treated Flat Glass
• ASTM E773-01 and ASTM E774-97 Standard Specification and Test Methods of Insulating Glass Units

Certifications:

• Insulating Glass Certification Council (IGCC) CBA Rating
• Insulating Glass Manufacturers Alliance (IGMA)
• Glass Association of North America (GANA)

For additional information and size limitations of insulating glass contact info@insuliteglass.com